Rawlplug R-Kem II Resin 300ml

Rawlplug R-Kem II Resin 300ml

£7.95 +VAT

Rawlplug R-Kem II Polyester Resin 300ml

The most convenient bonded anchor for general purpose use. Quick, secure and simple installation

SKU: 5906675050256 Categories: Chemical Stud, Resin, Sealants , Adhesives & Cleaning

Description

Rawlplug R-Kem II Resin 300ml + 2 Mixing Nozzles

Rawlplug R-Kem II Resin 300ml.The most convenient bonded anchor for general purpose use.
Quick, secure and simple installation
Product with a wide spectrum of use in the medium load capacity area
Ideal for applications where mechanical anchors are not suitable
Easy dosage thanks to patented self-opening system and use of a manual or pneumatic gun
The option of using a standard manual silicone gun
Suitable for multiple uses. Partly used product can be reused after fitting new nozzle
Styrene Free
ETA Approved

Applications

Consoles
Staircases
Gates
High racking
Canopies
Sanitary appliances
Steel constructions
Railings
Handrails
Ladders
Cable trays

Features & Benefits

Approved for use in non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
Available in a winter version with faster curing time. It can be used from -20°C.
The most convenient bonded anchor for general purpose use
Quick, secure and simple installation
Product with wide spectrum of use in the medium load capacity area
Ideal for applications where mechanical anchors are not suitable
Easy dosage thanks to patented self-opening system and use of manual or electric gun
Option of use standard manual silicone gun
Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Instalation Guide

Drill hole to the required diameter and depth for stud size being used.
Solid substrates: clean the drill hole thoroughly with brush and hand pump at least four times before installation.
Insert cartridge into gun and attach nozzle.
Dispense to waste until even colour is obtained.
Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Attach fixture and tighten the nut to the required torque.